Implementasi Smart Room Pada Ruangan Very Important Person (VIP) Berbasis Internet of Things (IoT)
Main Article Content
Abstract
The development of an Internet of Things (IoT)-based smart room system in a Very Important Person (VIP) room was carried out using a NodeMCU ESP8266 microcontroller, a Passive Infrared (PIR) sensor, and the Blynk application. The system is capable of detecting human presence at a distance of up to 5 meters with a detection angle of 35°-145°, and automatically controlling electronic devices such as lights and music players. Additional manual control is carried out through the Blynk application for volume and equalizer settings. Testing shows that the system successfully reduces electricity consumption by turning off devices when no users are present. The PIR sensor detection success rate reached 98% in a 7 x 4 meter room, with a system response time of less than 2 seconds. The system also supports light control through two methods: input from the PIR sensor and the Blynk application. The overall implementation demonstrates operational efficiency, ease of management, and potential energy savings in an IoT-based VIP room facility.
Article Details

This work is licensed under a Creative Commons Attribution-NonCommercial-ShareAlike 4.0 International License.
References
[2] Yanto, Mingki, dan Joewono, A. 2017. “Alat Pengetesan Kurva Polarisasi Speaker”. Widya Teknik.
[3] K. Jha, A. Doshi, P. Patel, and M. Shah, 2019. “Artificial Intelligence in Agriculture A comprehensive review on automation in agriculture using artificial intelligence” Artif. Intell. Agric., vol. 2, pp. 1–12.
[4] Stojkoska, B. L. R., & Trivodaliev, K. V. 2017. ”A review of Internet of Things for smart home: Challenges and solutions”. Journal of cleaner production, 140, 1454-1464.
[5] Ahadiah, S., Muharnis, M., & Agustiawan, A. 2017. “Implementasi Sensor PIR Pada Peralatan Elektronik Berbasis Microcontroller”. Inovtek Polbeng
[6] D. Kurnianto, A. M. Hadi, dan E. Wahyudi. 2016. “Perancangan Sistem Kendali Otomatis pada Smart Home menggunakan Modul Arduino Uno”. JNTE, vol. 5, no. 2, pp. 260–270.
[7] Andrianto, H. dan Darmawan, A. 2017. “Arduino; Belajar Cepat dan Pemrograman.” Bandung: Informatika.
[8] Hakim, E. A. 2012. “Sistem Kontrol.” Malang: UMM Press.
[9] R. S. Kadja, M. M. Tobi, dan Y. Kayetanus. 2019. “Makalah Peralatan Tegangan Tinggi Relay.” Jurusan Teknik Elektro Fakultas Sains dan Teknik Universitas Nusa Cendana.
[10] M. Syahwil. 2013. “Panduan Mudah Simulasi dan Praktik Mikrokontroler.” Yogyakarta: Andi Offset.
[11] Windiariska. 2015. “Mengenal Jenis Alat Elektronik Pemutar Musik”. https://www.ibukreatif.net/2015/08/mengenal-jenis-alat-elektronik-pemutar.html diakses pada 22 Januari 2023.
[12] Suryanto, E. D. Marindani, dan A. Hartoyo. 2018. “Implementasi Akses Ruangan Dan Penerangan Ruang Berbasis RFID Dan PIR Menggunakan Arduino Mega”. Jurusan Teknik Elektro Fakultas Teknik Universitas Tanjungpura.
[13] Artono, Budi. dan Susanto, Fredy. 2018 "Wireless smart home system menggunakan internet of things." Jurnal Teknologi Informasi Dan Terapan.
[14] Rostini, A. N., & Junfithrana, A. P. 2020. Aplikasi smart home node mcu iot untuk blynk. Jurnal Rekayasa Teknologi Nusa Putra.
[15] Dewi. N. H, Rohmah. Mimin F, dan Zahara. Soffa. 2019.”Prototype smart home dengan modul nodemcu esp8266 berbasis internet of things (iot).” Doctoral dissertation, Universitas Islam Majapahit Mojokerto.
Ilmu Pendidikan. Universitas Lampung: Bandar Lampung
[19] Kumparan. 2022. 7 Cara Pelestarian Budaya Lokal di Indonesia. [Online]. Available : https://kumparan.com/kabar-harian/7-cara-pelestarian-budaya-lokal-di-indonesia-1xEfaN2MHzV. [Accesed: 3 August 2023].
[20] Traverse.id. 2023. Talempong: Melodi Harmonis dari Sumatera Barat. [Online]. Available : https://traverse.id/culture/talempong-melodi-harmonis-dari-sumatera-barat/@himsaifanah. [Accesed: 8 May 2023]
[21] Yendri, Dodon., & Eka Rahmi Putri. “Sistem Pengontrolan dan Keamanan Rumah Pintar (Smart Home)”. 2018
[22] Putri, A. Y.. & Yendri, Dodon. “Sistem Pemesanan makanan dan minuman pada restoran menggunakan teknologi NFC berbasis Android” (2018)